Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It's discreet, does not use LED indicators or key fobs and is hidden within the wiring of your vehicle.
It also permits the user to disable the system temporarily through Transport Mode in the event of renting their vehicle. This guide will guide you through the installation of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning attacks and relay attacks. The system is connected directly to the ECU of your vehicle and protected by a PIN code you set. It is undetectable by thieves using diagnostic scanners or other modern methods. It isn't able to be disabled using circuit cuts.
The system is easy to use, but it's important to have professional installation to ensure a secure and secure connection with your vehicle's ECU. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also recommend an alarm or tracking system to complete the protection package for your vehicle.
First, the installer needs to disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. After that, the installer can safely begin work. Basic hand tools can be used to ensure precise connections. A multimeter can be used to test electrical values. Cable ties and insulation tape are also essential for protecting connections and keeping wiring neat. In addition, the user's manual offers specific instructions specific to your Ghost Immobiliser model.
It is essential to choose the right grounding spot that is free of paint or debris during installation. The installer must also make sure the immobiliser's H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. The wires can be connected or soldered depending on the model. Using a top-quality connector is recommended to ensure a durable and reliable connection.
Transport Mode can be activated by the client after the installation is completed. This allows mechanics or valet parking to access the vehicle without having to know the pin code. To do this, the customer has to hit the service button on the dashboard five times within 2 seconds. After this is done the system will verify with 5 signal indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's a great option for anyone who regularly rents out their vehicles on platforms like Turo. Having an immobiliser can also reduce insurance premiums, since it greatly reduces the chance of theft.
Getting Started
You can't go far wrong with an autowatch ignition device if you want to protect your car from theft. The device stops your car from running even when someone copies or steals your key. This is due to its high-tech technology, which is designed to prevent the engine from starting until the correct PIN code is entered.
The device works by connecting to the CAN bus network in your vehicle, allowing it to communicate with the ECU directly. It uses the buttons on your steering wheel and dashboard to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your vehicle. This is the best security system to protect your car's pride and joy and preserve its value when you want to sell it in the future.
Installing a ghost immobiliser is an easy procedure, but it's important to follow the directions carefully to avoid issues with electricity and system malfunctions. First, you need to locate and determine a constant 12V power source as well as a good grounding point on the vehicle's chassis. Then, you can begin connecting the wires to the immobiliser. Use high-quality connectors, and soldering methods to create an effective connection. Connect the connections with heat shrink tubing or insulation tape, or other materials to prevent short circuits in electrical power.
Once the wires are connected, you can plug in the battery and start the engine to test whether the immobiliser is functioning. Once everything is working properly you can place it in a secure location under the dash or elsewhere in the vehicle. Make sure you hide it properly to stop a thief from tampering with it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it's a top-quality deterrent to car burglars. It is impervious to key cloning and hacking and cannot be disabled without the code. The device is easy to use, and it can be set into a service valet setting so that your vehicle won't be activated if you bring it for an MOT or servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system specifically designed to deter theft of vehicles. It connects directly to the vehicle's CAN bus and communicates with the ECU, making it virtually undetectable to your vehicle. Unlike other aftermarket systems that require the removal of circuit components the Ghost Immobiliser won't interfere with your vehicle's factory settings.
The system is also inaccessible by thieves using diagnostic scanning tools. This is because the system doesn't transmit and receive radio frequency signals, and it uses the CAN data to communicate with your ECU. It doesn't even require any modifications to your existing key fobs.
To use the Ghost Immobiliser, simply switch on the ignition in your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. You can now start your vehicle and drive in a safe manner.
Once installed Once installed, the Ghost Immobiliser will protect your car from key cloning and hacking while preserving the value of your pride and joy. If you have to surrender your car to valet parking or for service The Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll require a constant power source (12V) in addition to a grounding source to complete the installation of a Ghost immobiliser. Make sure that both are well-insulated and able to be touched. It's also recommended to use cable tie to secure and bundle the wires, since this will decrease the chance of being tampered with by thieves. To avoid making mistakes, double-check these points and mark them with labels or tape. It's recommended to inspect every connection for signs of wear and tear. Connectors that are loose could cause system malfunctions, so be sure they're securely fixed and well-insulated. Finally, don't forget to test the Ghost Immobiliser after the installation is complete. This will make sure that the unit is functioning properly and that all connections are secure and insulated. If there are any issues, be certain to fix them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that seamlessly into your car's ECU to block unauthorized engine start. Its innovative technology protects your car against key cloning, hacking, and other common tactics that thieves employ to steal cars. The Ghost also works in conjunction with existing alarm and tracking systems to give the best protection for your vehicle. The Ghost's unmatched features, paired with its discreet design makes it a sought-after choice for drivers who love cars and security-conscious drivers.
To ensure proper integration of the Ghost Immobiliser, it is essential to follow all steps of the installation process. Check the wiring diagram of the vehicle to assist you in locating and connecting the wires. Then, you'll need to identify the power source and grounding points. Once you've located them, you'll be required to mark the points to make them easily identifiable when installing. In addition, it is vital to use only the best tools and materials. Hand tools are a must in making connections that are precise while a multimeter can verify electrical values and ensure security. Cable tie and insulation tape ensure that all connections are neat. cost of ghost immobiliser -specific user manual is also available.
It is crucial to test the system prior installing it. Enter the PIN code into the system and start the vehicle. This will ensure that the immobiliser functions as intended and stop unauthorised vehicle starts. This step should be done frequently as part of your regular inspections of the vehicle to ensure the system is always functioning properly.
Once the installation is complete Once the installation is complete, you can drive your vehicle with confidence. The Ghost will safeguard your pride and joy from would-be car thieves. It will ensure that no one is able to take your car away if they do not have the correct PIN code. The Ghost can be linked to an approved Thatcham tracker, which detects attempts at theft or tampering. This will allow you to locate your car if it's stolen.
The Ghost can be used on a wide range of vehicles and is compatible with the majority of major brands. Monty's Locksmith can assist you in securing your vehicle using this cutting-edge device. Contact us today to find out more about our service and installation options. We are a TASSA registered installer, a certificate that guarantees we follow strict standards for the installation of our products. This assures insurance companies, customers and law enforcement officials that all installations are completed in a safe and correct manner.